All samsung unlock code

*2767*688** = Unlocking Code
***8999*8378** = All in one Code
***4777*8665** = GPSR Tool
***8999*523** = LCD Brightness
***8999*3825523** = External Display
***8999*377** = Errors
***5737425** = JAVA Something{I choose 2 and it chrashed}][/b]
***2255** = Call List

***536961** = Java Status Code
***536962** = Java Status Code
***536963** = Java Status Code
***53696** = Java Status Code

***1200** = AFC DAC Val
***1300** = IMEI
***1400** = IMSI

***2562** = ??? White for 15 secs than restarts.
***2565** = ChAeck Blocking
***3353** = Check Code
***3837** = ??? White for 15 secs than restarts.
***3849** = ??? White for 15 secs than restarts.
***3851** = ??? White for 15 secs than restarts.
***3876** = ??? White for 15 secs than restarts.

***7222** = Operation Typ (Class C GSM)
***7224** = I Got !! ERROR !!
***7252** = Oparation Typ (Class B GPRS)
***7271** = Multi Slot (Class 1 GPRS)
***7274** = Multi Slot (Class 4 GPRS)
***7276** = Dunno
***7337** = EEPROM Reset (Unlock and Resets Wap Settings)
***2787** = CRTP ON/OFF
***3737** = L1 Dbg data
***5133** = L1 Dbg data
***7288** = GPRS Attached
***7287** = GPRS Detached
***7666** = SrCell Data
***7693** = Sleep Act/DeAct (Enable or Disable the Black screen after doing nothing for a while)
***7284** = Class : B,C or GPRS
***2256** = Calibration Info
***2286** = Battery Data
***2527** = GPRS Switching (set to: class 4, class 8, class 9 or class 10)
***2679** = Copycat feature (Activate or Deactivate)
***3940** = External loop test 9600 bps
***4263** = Handsfree mode (Activate or Deactivate)
***4700** = Half Rate (Activate or Deactivate)
***7352** = BVMC Reg value
***8462** = Sleeptime
***2558** = Time ON
***3370** = EFR (Activate or Deactivate)
***3941** = External looptest 115200 bps
***5176** = L1 Sleep
***7462** = SIM phase
***7983** = Voltage/Frequenci (Activate or Deactivate)
***7986** = Voltage (Activate or Deactivate)
***8466** = Old time
***2255** = Call ???
***5187** = L1C2G trace (Activate or Deactivate)
***5376** = ??? White for 15 secs than restarts.
***6837** = Official Software Version
***7524** = KCGPRS
***7562** = LOCI GPRS
***7638** = RLC allways open ended TBF (Activate or Deactivate)
***7632** = Sleep mode Debug
***7673** = Sleep mode RESET
***2337** = Permanent Registration Beep
***2474** = ???
***2834** = Audio Path
***3270** = DCS support (Activate or Deactivate)
***3282** = Data (Activate or Deactivate)
***3476** = EGSM (Activate or Deactivate)
***3676** = Flash volume formated
***4760** = GSM (Activate or Deactivate)
***4864** = Dunno doesn't work on newer versions
***5171** = L1P1
***5172** = L1P2
***5173** = L1P3
***7326** = Accessory (I got Vibrator)
***7683** = Sleep variable (8)
***7762** = SMS Brearer CS (Activate or Deactivate)
***8465** = Time in L1
***9795** = wtls key
***2252** = Current CAL
***2836** = AVDDSS Management (Activate or Deactivate)
***3877** = Dump of SPY trace
***7728** = RSAV done** (Everything went to standart but nothing was deleted)
***2677** = ARM State (None or Full Rate)
***8999*636** = Have no clue what it is, i see 20 lines
***9999** = Software version
***8999*8376263** = HW ver, SW ver and Build Date
***8888** = HW version
***8377466** = Same HW/SW version thing

***7465625** = Check the locks
*7465625*638*Code** = Enables Network lock
**7465625*638*Code** = Disables Network lock
*7465625*782*Code** = Enables Subset lock
**7465625*782*Code** = Disables Subset lock
*7465625*77*Code** = Enables SP lock
**7465625*77*Code** = Disables SP lock
*7465625*27*Code** = Enables CP lock
**7465625*27*Code** = Disables CP lock
*7465625*746*Code** = Enables SIM lock
**7465625*746*Code** = Disables SIM lock
*7465625*228** = Activa lock ON
**7465625*228** = Activa lock OFF
*7465625*28638** = Auto Network lock ON
**7465625*28638** = Auto Network lock OFF
*7465625*28782** = Auto subset lock ON
**7465625*28782** = Auto subset lock OFF
*7465625*2877** = Auto SP lock ON
**7465625*2877** = Auto SP lock OFF
*7465625*2827** = Auto CP lock ON
**7465625*2827** = Auto CP lock OFF
*7465625*28746** = Auto SIM lock ON
**7465625*28746** = Auto SIM lock OFF

*2767*3855** = E2P Full Reset
*2767*2878** = E2P Custom Reset
*2767*927** = E2P Wap Reset
*2767*226372** = E2P Camera Reset
***6420** = MIC Off
***6421** = MIC On
***6422** = MIC Data
***6428** = MIC Measurement
***3230** = Trace enable and DCD disable
***3231** = Trace disable and DCD enable
***3232** = Current Mode
**7263867** = RAM Dump (On or Off)
*2767*49927** = Germany WAP Settings
*2767*44927** = UK WAP Settings
*2767*31927** = Netherlands WAP Settings
*2767*420927** = Czech WAP Settings
*2767*43927** = Austria WAP Settings
*2767*39927** = Italy WAP Settings
*2767*33927** = France WAP Settings
*2767*351927** = Portugal WAP Settings
*2767*34927** = Spain WAP Settings
*2767*46927** = Sweden WAP Settings
*2767*380927** = Ukraine WAP Settings
*2767*7927** = Russia WAP Settings
*2767*30927** = GREECE WAP Settings
*2767*73738927** = WAP Settings Reset
*2767*49667** = Germany MMS Settings
*2767*44667** = UK MMS Settings
*2767*31667** = Netherlands MMS Settings
*2767*420667** = Czech MMS Settings
*2767*43667** = Austria MMS Settings
*2767*39667** = Italy MMS Settings
*2767*33667** = France MMS Settings
*2767*351667** = Portugal MMS Settings
*2767*34667** = Spain MMS Settings
*2767*46667** = Sweden MMS Settings
*2767*380667** = Ukraine MMS Settings
*2767*7667**. = Russia MMS Settings
*2767*30667** = GREECE MMS Settings
*335** = Delete all MMS Messages
*663867** = Dump Mm file
***536961** = WAPSAR enable / HTTP disable
***536962** = WAPSAR disable / HTTP enable
***536963** = Serial eable / Others disable
***53696** = Java Download Mode
***5663351** = Wap Model ID [Your Model]
***5663352** = Wap Model ID [SEC-SGHXXXX/1.0]
***566335** = Wap Model ID [SEC-SGHXXXX/1.0]
*2767*66335** = Check on which model it is
*2767*7100** = SEC-SGHS100/1.0
*2767*8200** = SEC-SGHV200/1.0
*2767*7300** = SEC-SGHS300/1.0
*2767*7650** = Nokia7650/1.0
*2767*2877368** = Reset WAP Model ID to standa

IMPORTANT INFORMATION SoftBank 705P/705Px Software Update

Thank you for using Softbank Mobile.
Faults (described below) have been found on some of SoftBank 705P/705Px handsets (manufactured by Panasonic Mobile Communications).
1. Identified Faults


When a sender's mail address contains a *quot;/*quot; (slash), characters after the *quot;/*quot; may not appear in Message List View or Message Window.
If battery is charged with handset power off, Retrieve Network Information window sometimes appears when handset is powered on again.
On occasion, parts of web links are not recognized as URLs (http://, https:// or rtsp://) in incoming messages.
Software to resolve the faults will be e available via Software Update. Software Update also includes other enhancements for 705P/705Px. We encourage all 705P/705Px users to download the new software. Please accept our apologies for any inconvenience. We appreciate your understanding.
2. Comprehensive SoftBank Mobile Response


Affected handsets:
Some products of SoftBank 705P (released on October 7, 2006)
Some products of SoftBank 705Px (released on June 21, 2007)
Software Update
Software Update will be available via the Network from November XX, 2007. Please follow steps below for Software Update.








*lt; Software Update Precautions *gt;


Before updating software, turn power off to end all active functions/applications, then restart handset.
Make sure battery is fully charged or charger is connected; a low battery may cause update failure.

Implement Software Update in a place where signal is strong and stable. Do not remove battery during Software Update.

Software Update may take up to approximately 15 minutes. More than one update may be required depending on handset. Follow onscreen instructions.

Do not remove battery during Software Update. If Update fails to complete after about 20 minutes, remove and reinstall battery before retrying. If Update still fails after retrying, bring the handset to the nearest 

SoftBank shop.

Handset is disabled until update is complete. Other functions are disabled during Software Update.
Software Update should not affect Phone Book entries, images, sounds, etc. saved on 705P/705Px. 

However, handset data may be lost due to hardware failure, damage, or water damage etc. Always back up important information before using Software Update.

Update automatically cancels Keypad Lock. Set Keypad Lock again after Software Update if necessary.
Packet transmission fees do not apply to updates (including checking,
downloading and rewriting).

Unlock e250 and j600 without pc.

Unlock e250 and j600 without pc.


Just enter #*7337# and wait to reboot the set.......... 




Your phone will b unlocked.

How to find out ur samsung E250 phone it is E250V or E250d

this cod *#1234#

All Samsung USB Driver

All Samsung USB Driver

- Simmental Driver
- Siberian Driver
- Swallowtail Driver
- Semseyite Driver
- Sloan Driver
- Spencer Driver
- Schorl Driver
- EMPChipset Driver
- HSP Driver
- HSP Plus Driver
- Symbian USB Download Driver
- Symbian Samsung PC DLC Driver
- Sherwsbury Driver
- EMP Chipset2 Driver
- Zinia Serial Driver
- VIA Driver
- NXP Driver
- MS USB Modem Driver
- CDMA USB Modem Driver
- WCDMA USB Modem Driver
- Qualcomm USB Driver


Download

Samsung I780 hard reset

1. Power off the phone
2. Hold down the begin call and end call buttons (green & red)
3. Press and hold the power button
4. Once the phone’s status LED turns red, “RELEASE” the power button but KEEP the other 2 pushed. Very important to do this !!!!!
5. You will get a prompt to press the space key to format, or any other key to continue

How to Do Hard Reset Samsung I8000

To Perform Hard Reset For New Samsung GT-I8000 Do this:

Call + Power + Volume + Keylock + Reset


Good Flashing For All

GUIDE: How to flash M8800 Pixon

GUIDE: How to flash M8800 Pixon






First thing to always remember, is BACK UP YOUR PHONE, Pictures,wallpapers,music, and any contacts you have saved on your phone. I am not responsible for any damage to you, your phone, computer, or lost of data in this process. This is a guideline intended for professional technicians.
USE AT YOUR OWN RISK!!!
1. USB cable that came with your phone.
2. Samsung PC Studio 3 witch can be found here:
http://www.samsung.com/uk/support/d..._ia_cd=01011800
Install this software first, it contains the drivers for your phone, and has every thing you need for backup.
3. Multiloader v5,50 http://www.4shared.com/file/75565159...ader_V550.html
5. Newest unbrranded firmware MEGAUPLOAD - The leading online storage and file delivery service

-----------------------------Now you are ready to begin-----------------------------------
1. Make sure Samsung PC Studio is installed and communicates with your phone. And unpack the firmware in a folder you can easily find it.
2. Remove the Sim and MicroSD from your phone and replace the battery.
3. With the phone OFF connect the phone and computer with the USB cable.
4. While holding the no. 9 button on the phones key pad, tap the power button, the phone screen will come on black with a red stripe that says "Download" ( For Tocco and Pixon users : Hold down the "Volume -" button on the left side, and the "Camera" button on the right, then press the "Power" button = all three buttons need to be pressed together. Your phone should start up into a red\blue on black bootloader screen.)

5. Now run MultiLoader v5.33
6. Select the radio button that includes MSM6275/MSM6280.

7. Select Boot Change and Full Download.
8. Then click Boot, and select the boot files from the unpacked firmware folder.

9. Click the Amss, Rsrc1, and Rsrc2.
10. Then press the Factory FS tab, and select the appropriate files from the firmware folder also.
11. Select (Low).r2c NOT (Mid).r2c. (Phone may not restart if you select mid)
12. FOTA and ETC fields are left blank.

13. Click the Port Search button, it will find your phone and show the com port is ready.
14.Click the download button and be patient, this will take a few minutes to complete.

15.When it's finished, it will show "ok complete".

16.Unplug the phone from the USB cable, reinstall the sim, MicroSD, and power up the the phone.
17. Now with every thing complete, perform a hard reset by typing *2767*3855# into the hand set.
18. When the phone resets type *#1234# into your handset to check your new firmware ver.



###IF ANY FILE NOT FOUND SEARCH IN GOOGLE-I HOPE YOU GOT IT###

How to Unlock new QUALCOM (3G ) Samsung models

This is short manual for new 3G Samsung phones (U900, U800, F480, U700 etc)


In order to unlock it, do the following steps:

Power on the phone and activate "QUALCOM" USB Mode - type *#782872# and confirm.
Connect phone to PC USB port with USB cable
Make sure to install QUALCOM drivers ! ! ! (Support/Drivers/Samsung/Qualcom_driver.rar)
Start Samsung Rocker and select Your model
Com port selection is done automaticaly, You DO NOT NEED to select port
Check "Unlock" and click "Do Job"
Thats it
If everything is done well, You should have following log in Samsung Rocker :

Samsung Rocker v1.21Beta

Loaded 456 models

Available COM ports: COM1, COM3, COM17, COM29

Doing Job, Please Wait
Using \\.\COM30 port

Modell: SGH-U900
MSLAddress: R6VQ488053
IMEI: 352442-02-184326-1
Calculating... OK
MSL2 Code: PASSED
MSL2 Password: PASSED
Closed \\.\COM30 port
Using \\.\COM15 port
Unlocking... OK
Unlock & Unfreeze: DONE
Closed \\.\COM15 port
Using \\.\COM30 port
Resetting Phone

Closed \\.\COM30 port


To exit QUALCOM mode, type *#726872# via keyboard.

SAMSUNG 2120i BLINKING 100% SOLUSTION

SAMSUNG 2120i BLINKING 100% SOLUSTION


SELECT THIS MODLE E2121B
AND SELECT FILE

BIN,CLA
TFS
CSE
AND MOBILE 100000000000% SET OK
TESTED MANY TIMES


Selected model: E2121B
Selected com port: COM9
Selected speed port: 921600
Please, connect phone and press power button 3 seconds
Phone Detected
Sending loader1... OK
Flash ID: 08
Sending loader2... OK
Start TFS format... OK
Start NOR flash
NOR flash - ok
Start Flash TFS
TFS flash - ok
Start Flash CSC
CSC format - ok
CSC flash - ok
Download - ok
Elapsed time: 707 second, sw ver: 3.4.0074